Best Seller Items
-
FIREROD® IMMERSION HEATERS
COMPACT HEATER ENABLES VERSATILE HEATING SYSTEM DESIGN
FIREROD water immersion heaters are ideal for replacing large screw-plug immersion heaters. Because of its compact size the product can be very versatile when designed into a heating system.
These water immersion heaters come complete with a brass 3⁄4 inch National Pipe Thread (NPT) double threaded fitting, which allows you to add conduit boxes. Also, FIREROD immersion heaters are sealed at the lead end with a silicone rubber seal.
Solid copper leads, with silicone rubber sleeves, are provided for unrestricted wiring. These units are recommended for immersion in water or 90+ percent water soluble solutions.
- Nickel-chromium resistance wire precisely centered in the unit ensures even, efficient distribution of heat to the sheath
- MgO insulation compacted to the proper density results in high dielectric strength and contributes to faster heat-up
- Alloy 800 sheath resists corrosion from water
- Metallurgically-bonded conductor pins for trouble-free electrical continuity
- 240 and 480VAC voltage allows flexibility in wiring the heater for use in your particular applications
-
INSULATED TUBE & WIRE THERMOCOUPLES STYLE 62
SERV-RITE® INSULATED TUBE & WIRE THERMOCOUPLES – STYLE 62
STYLE 62 IS FITTED WITH AN ENCAPSULATED MEASURING JUNCTION THAT IS IDEAL FOR CORROSIVE FLUIDS AND GASES, SUCH AS SULFURIC ACID, HYDROFLUORIC ACID, STRONG MINERAL ACIDS AND OILS
-
SERIES CZR
SOLID STATE RELAY OFFERS A COMPACT, VERSATILE MERCURY-FREE SOLUTION
The SERIES CZR solid state relay provides a low-cost, highly-compact and versatile solid state option for controlling electric heat. With DIN-rail and back panel mounting standard on every controller, the CZR solid state relay allows for simple and quick installation.
The extensive capabilities of the SERIES CZR include single-phase, 18 to 42 ampere zero-cross switching up to 600VAC (see output rating curve). It’s unique integrated design removes the guess work associated with selecting a proper heat sink and precise terminations for the application.
This solid state relay controller holds many agency certifications and is ideal for applications that require UL®, CSA and CE approvals. The SERIES CZR is available in VAC/VDC input contactor versions and all configurations are model number dependent and factory selectable.
The SERIES CZR solid state relay is protected by a two-year warranty.
-
Coiled Cable Heaters
Coiled cable heaters are the ultimate design in coiled type heaters. Their design and technical development gives them a longer lifespan than the competition, due to special features including:
-
MINERAL INSULATED THERMOCOUPLES – STYLE AC – STANDARD PLUG OR JACK TERMINATION
WATLOW’S MINERAL INSULATED (MI) THERMOCOUPLES ARE FAST-RESPONDING, DURABLE AND CAPABLE OF HANDLING HIGH TEMPERATURES.
Manufactured with best-in-class XACTPAK®, Watlow’s trademark for metal sheathed, mineral insulated (MI) thermocouple material, XACTPAK responds fast because the protective metal outer sheath allows use of smaller diameter thermocouple conductors. The rock hard compacted MgO insulation further enhances the sensor’s ability to “read” temperature by transferring heat quickly to the measuring junction.
The XACTPAK protecting sheath and compacted insulation outperform bare wire thermocouples in most applications
-
LDH SERIES AND D SERIES DUCT HEATERS
EASILY ADAPTED TO MANY NON-PRESSURIZED AIR HEATING SYSTEMS
Watlow duct heaters are constructed of sturdy 0.430 in. (11 mm) diameter WATROD heating elements mounted to a 1⁄4 in. (6 mm) thick steel flange. These air duct heaters are easily adapted to many non-pressurized air-heating systems.
Duct heaters are easily installed in applications requiring a wide range of temperature versus air flow combinations.
The modular duct heater offers increased reliability. The individual modules are removable through the housing of the assembly, which eliminates the need to pull the complete heater from the ductwork. This reduces downtime costs because the heating elements can be replaced individually. Performance improvements include quicker response time and reduced infiltration from the air stream being heated into the electrical enclosure.
Watlow air duct heaters offer advantages over gas or oil fired and open coil electric units with:
-Installation flexibility—no flues or fuel lines
-100 percent energy efficient—no energy loss up the flue
-Universal availability of electricity
-Resistance coil in sheath is protected from corrosive environments
-Duct heaters with general purpose enclosures meet UL® and CSA component recognition to 480 and 600VAC maximum respectively—UL® and CSA file numbers are E52951 and 31388.- Long life alloy 800 sheath resists corrosion/oxidation while protecting resistance coils against contamination
- MgO insulation filled elements compacted to rock hard density maximizes dielectric strength, heat transfer and life
- Field replaceable heating elements permits easy service and reduces downtime
- General purpose terminal enclosure offers easy access to wiring
- WATROD hairpins are recompacted after bending to eliminate hot spots and electrical insulation voids
-
POLYIMIDE BRACKET TUBE & WIRE THERMOCOUPLE
DESIGNED TO MEASURE ROLLER TEMPERATURE
The Polyimide thermocouple, when used with the aluminum bracket, is designed primarily to measure roller temperature. Light pressure on the roller enables the Polyimide thermocouple to measure roller surface temperature without using slip rings. This type of set-up greatly reduces lag time and eliminates slip rings cost and maintenance. It can also be used to measure conveyor belt temperatures and any other moving part by riding gently on the part surface.
-
PTFE Belts, Tapes, Fabrics
PTFE Belts, Tapes, Fabrics
PTFE and silicone coated fabrics, belts and tapes improve performance. By customizing our products to your specific process we can deliver superior throughput and release results.We specialize in cost-effective solutions to manufacturing problems.
-
-
PIPE CLAMP MOUNT TUBE & WIRE THERMOCOUPLES – STYLE 72
PIPE CLAMP MOUNT TUBE & WIRE THERMOCOUPLES – STYLE 72
THE STAINLESS STEEL CLAMP ALLOWS TEMPERATURE MEASUREMENT WITHOUT DRILLING OR TAPPING WHICH IS IDEAL FOR MEASURING PIPE TEMPERATURES
-
NOZZLE STYLE TUBE & WIRE THERMOCOUPLE – STYLE 71
NOZZLE STYLE TUBE & WIRE THERMOCOUPLE – STYLE 71
THE NOZZLE THERMOCOUPLE HAS A SHORT INSTALLATION DEPTH AND A LOW PROFILE TO ALLOW CONTROL OF THIN PLATEN SECTIONS
-
INSULATED TUBE & WIRE THERMOCOUPLES STYLE 62
SERV-RITE® INSULATED TUBE & WIRE THERMOCOUPLES – STYLE 62
STYLE 62 IS FITTED WITH AN ENCAPSULATED MEASURING JUNCTION THAT IS IDEAL FOR CORROSIVE FLUIDS AND GASES, SUCH AS SULFURIC ACID, HYDROFLUORIC ACID, STRONG MINERAL ACIDS AND OILS
-
INSULATED TUBE & WIRE THERMOCOUPLES STYLE 61
SERV-RITE® INSULATED TUBE & WIRE THERMOCOUPLES – STYLE 61
STYLE 61 IS FITTED WITH AN EXPOSED JUNCTION AND IS SUITABLE FOR MOST GENERAL PURPOSE APPLICATIONS, SUCH AS MEASURING AIR, GAS AND SURFACE TEMPERATURES.
Thermocouples feature flexible SERV-RITE® wire insulated with woven fiberglass or high temperature engineered resins. For added protection against abrasion, products can be provided with stainless steel wire braid and flexible armor. ASTM E230 color-coding identifies standard catalog thermocouple types.
The addition of a metal sheath over the thermocouple provides rigidity for accurate placement and added protection of the sensing junction.
-
GROMMET STYLE TUBE & WIRE THERMOCOUPLES – STYLE 73
GROMMET STYLE TUBE & WIRE THERMOCOUPLES – STYLE 73
THE EXTREMELY LOW PROFILE OF THE STAINLESS STEEL GROMMET PROVIDES FAST RESPONSE TIME
-
FLEXIBLE EXTENSIONS TUBE & WIRE THERMOCOUPLES
FLEXIBLE EXTENSIONS ALLOW THERMOCOUPLES TO BE DISCONNECTED FROM A SYSTEM WITHOUT DISTURBING THE REMAINING WIRING
-
ENCAPSULATED TUBE & WIRE THERMOCOUPLES
PERFLUOROALKOXY (PFA) ENCAPSULATED TUBE & WIRE THERMOCOUPLES – STYLE 65
THE RIGID SHEATH IS COVERED WITH A 0.010 IN. (0.25 MM) WALL OF PFA FOR CORROSION RESISTANCE IN ACID ENVIRONMENTS
An epoxy seal improves moisture resistance of the sensor and provides a barrier for migrating fumes in corrosive applications.
-
BRASS SHIM TUBE & WIRE THERMOCOUPLES – STYLE 74
BRASS SHIM TUBE & WIRE THERMOCOUPLES – STYLE 74
THE SHIM STOCK THERMOCOUPLE HAS A LOW PROFILE AND CAN BE PLACED BETWEEN COMPONENTS FOR SURFACE TEMPERATURE MEASUREMENT
-
ADJUSTABLE SPRING
ADJUSTABLE SPRING AND ARMOR STYLE THERMOCOUPLES – STYLES 10, 11, 12
ADJUSTABLE SPRING STYLE THERMOCOUPLES BEND TO ANY ANGLE TO FIT A WIDE RANGE OF HOLE DEPTHS, ELIMINATING THE NEED TO STOCK NUMEROUS STYLES. A STAINLESS STEEL HOSE OFFERS ADDITIONAL LEAD PROTECTION IN DEMANDING APPLICATIONS.
